The Thin Man

Climb up the vertical seam and cross up and left to the next left leaning seam until reaching a larger crack about 40' up. The first 20' are probably the crux. It is easy to blow it early by putting your gear where your fingers need to go.

Continue up the larger crack to a few liebacks on the left of flakes. At about 100' and then go right on a little ledge to belay.

P2 take any upward direction on easy (4th/easy 5.0) terrain for about 150'.

This route is 2 exfoliation slabs right of Peer Pressure. On the slab you will see a thin vertical seam with a few small nut placements that goes up about 15', with a horizontal seam near the top on the left and another crack starting up and left from the horizontal seam.

Have some very small nuts (#3 or #4 BD) and cams (00, 0, 0 TCUs) for the first 40' or so. After that .5-3" with gear belay of 1-3" on the ledge.