We're giving this page a facelift!
Visit the previous versionto make edits.
Peak Mountain 3

George

FA unknown
CREATED 
UPDATED 

Description

The formation’s eponymous route is an exposed-feeling, exciting bit of climbing with good protection where needed.

From the lower, midpoint, bolted anchor on the east side climb out onto some large positive edges with no real opportunity for protection until ten feet or so from the belay (so don’t fall). At this point follow the thin, corner crack up the overhanging bulge. The moves can be strenuous, but good nut placements and microcam placements abound which will ease the stress level (a #1 C3 fits quite well in one location).

Clip the bomber bolt and grunt over the top of the overhanging section. The rest of the climb is considerably easier on large, positive edges, which is a good thing because there is very little opportunity for protection (a #2 DMM Peenut is helpful).

Continue straight up, or bear left a little following a shallow, flaring almost-crack that has one opportunity where a #2 C4 sort-of fits.

Over the top onto interesting, smooth, and rounded quartzite. A 70m rope will get to the ground in a single rappel on the west side; a 60m rope will require two raps.

Location

Climbs on the the north-facing bit of the

George

prow and continues on the east face. Start at the midpoint, bolted anchor on the east side, reachable via

George Direct

, pitch one of

Lounge Lizards

, or by scrambling farther to the east.

Protection

Micro to medium nuts, micro cams, an optional hand-sized cam, one bolt, and bolted anchors top and bottom.