We're giving this page a facelift!
Visit the previous versionto make edits.
Peak Mountain 3

Autumn Mist

FA Bill Todd, 1980
CREATED 
UPDATED 

Description

Perhaps not as well known as

Anaconda

or

Viper

. Autumn Mist is a fine outing including an airy roof on P2.

NOTE: some crazy hard climber is working (or may have already freed) the FFA on P1 of this climb. So, you should know.... The anchors have been moved to facilitate a more convenient TR anchor. However... for lazy aid climbers such as myself, it is now more challenging to reach the start of P2. without a stickclip. More info below.

P1. C1+, some people end up aiding the rotten crack out right. However, if you're looking to climb the three star route, make sure you aid the thin cracks on the face just left of this rotten crack. So, scramble up the spike of rock just to the right of

Central Chimney

, and climb up thin cracks on great rock until forced into the rotten crack (which isn't too rotten at this point). Continue up to the new anchors. 90 feet.

P2. C2+/C3-, from the new anchor, you need to get up and right to an old bolt which leads to the roof, but the old bolt is now a little way away. One way to do it is with a large hook and a long runner. Swing the runner with the hook on the end at the hanger. This may take a while, but it's better than rapping. Otherwise, bring a stick clip. Anyway, once you've gained the single bolt, aid out the roof using your smallest TCUs and RPs until better (more secure) gear is reached. Climbers with belay slaves may want to belay shortly after the roof due to rope drag. 30 feet. Rope soloers may easily continue onward.

P3. 5.7 C2, pitch three is a mystery to me. The guide books show to go straight up keeping to the left of Viper but it looks mighty unlikely. I went up and right joining Viper at its old A4 crux. After finishing, I even rapped back down to scope out this supposed finish to Autumn Mist, and it looked pretty dang bleak. If someone has actually done this, I'd love to hear about it. So, correct me if I'm wrong, but I would finish on Viper (see Viper C3-). It seemed like the only choice to me.

Protection

Standard clean aid rack with some extra thin stuff for the roof on P2. Doubles from #00 TCUs (and/or Aliens) to #3 Camalots, one #4 Camalot, two sets stoppers, tricams, two #1 Lowe balls, RPs, HBs. Also, because of an anchor movement on P1 you may want a stick clip or a large hook.